FAQ

Frequently Asked Questions

Is it good to seal pavers in Florida?

Yes, in most cases, especially once color has faded or joints have emptied. A Northeast Florida washing company points to humid air, river moisture and afternoon storms as the things that feed algae and wash sand out. A sealed surface holds sand better and rinses cleaner. Unilock, a paver maker, adds that sealing is optional, since its pavers perform without it. To see where yours stand, ask for a free estimate.

How much does it cost to have pavers cleaned and sealed?

Published rates across Northeast Florida run $1.75 to $3.25 per square foot for a complete clean, sand and seal. That same range puts a two car driveway of 600 square feet around $1,050 to $1,950. Stripping a failed coat costs more. For a figure on your own Murray Hill pavers, call (904) 479-9763.

How long do paver sealers last?

Plan on two to five years. One Northeast Florida company that uses Trident sealers gives that span, and another says two to three years is typical. Strong sun, pool chlorine and summer storms shorten a coat's life. If water soaks in instead of beading, call (904) 479-9763 to have the coat checked.

Is there a downside to sealing pavers?

Yes. Sealing is a repeat cost, and Unilock puts the usual renewal at about every three to five years. A high gloss finish can turn slick when wet, and a whitish film can form if the coat goes on too thick or traps moisture. A careful contractor plans around both. To talk through finishes, ask for a free estimate.

Should pavers be cleaned before they are sealed?

Yes, always. Sealer grips whatever is on the surface, so algae, dirt and stains get locked in if they are left behind. A Northeast Florida washing company warns that sealing over dirt or damp pavers is a common reason a coat fails. Cleaning, new joint sand and a fully dry surface come first. To book all of it, call (904) 479-9763.

Do the older homes in Murray Hill need anything different before sealing?

Often a little more checking. The neighborhood's building boom came in the 1940s, so some driveways and walks have decades of weather behind them. A contractor should look for sunken pavers, empty joints and old sealer before quoting. Sealing does not fix a weak base, Unilock notes. To have an older surface looked at, ask for a free estimate.

Will leaves from my yard trees stain sealed pavers?

A sealed surface is easier to keep clean, but wet leaves can still leave marks. Western Interlock, a paver maker, ties stains from leaves to their tannins. A washing company adds that live oak tannin can set into concrete if it is left. Sweeping off leaves and getting the surface cleaned on schedule keeps marks from setting. To plan a cleaning, call (904) 479-9763.

Can the pavers around a backyard pool be sealed?

Yes. Pool decks are a regular sealing job. Unilock says a penetrating matte sealer keeps traction, while a high gloss finish can get slippery when wet. Ask which finish the contractor would use around the water. To have a pool deck looked at, ask for a free estimate.